פתח תפריט ניווט

קטגוריות ראשיות

קילומבו - Outlet - כרטיסי קול

תוצאות: 8
בחרת לסנן לפי: קילומבו - Outlet כרטיסי קול
יצרן
סינונים נוספים

יצרן טווח מחירים

נוספו לאחרונה
מחיר | שם מיין לפי:
Focusrite Rednet HD32R

Focusrite Rednet HD32R

RedNet HD32R
Overview

32-Channel Bridge between Dante Networks and Pro Tools|HD

RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports. HD32R acts as a 64-channel (32 in/32 out) digital break in/out box, operating in the same way as a standard interface, and supporting a wide range of Pro Tools|HDX and HD cards. Up to six HD32R modules can be used with a Pro Tools|HDX system and three with Pro Tools|HD, allowing the maximum channel count for either. The HD32R features a rugged, roadworthy exterior and high internal build quality, with Ethernet and power supply redundancy. In addition, it offers a compact 1U rack-mount form factor for a full 32 channels of I/O.

Rednet HD32R

Key Features

Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX
Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors
Provides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD
Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces
Permits multiple workstations to access the same interface hardware and I/O
No changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs
Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R
Additional Avid/Digidesign interfaces may be connected to expansion ports
Upgrade to RedNet interfaces while remaining fully compatible with TDM- or AAX-DSP-based plugins and saved sessions

Focusrite Rednet A16R

Focusrite Rednet A16R

RedNet A16R
16 channels of Dante-networked A-D and D-A conversion, with network and PSU redundancy

RedNet A16R expands Focusrite’s range of 1U Dante interfaces with network and power supply redundancy, providing 16 channels of analogue input and output with high quality A-D and D-A digital conversion at up to 119dB dynamic range, plus two channels of AES/EBU digital I/O, to and from the Dante network.




RedNet A16R provides conversion at standard rates – 44.1, 48, 88.2, 96, 176.4 and 192kHz at 24-bit resolution – with pull-up/down capability. Electronically-balanced analogue audio I/O is provided on DB25 connectors wired to AES59 specifications, and internal signals are balanced throughout. Inputs and outputs may be configured for either +18dBu or +24dBu = 0dBFS signal levels. Two additional channels of AES/EBU I/O with sample rate conversion are provided on XLR connectors. Sample rates and operating levels are selected remotely from software on the host computer. The clock source for the unit may be internal, or external via Word Clock or DARS (the latter via the XLR input). RedNet A16R also outputs Word Clock.

RedNet A16R features power and network redundancy, with two separate universal (100–240V) PSUs including IEC connectors with retaining clips, plus dual network interfaces on locking etherCON connectors, which can be set remotely to Redundant or Switched (daisy-chain) mode.

Key Features

16 channels of high-quality line-level analogue I/O
24-bit precision Focusrite conversion up to 192kHz
119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dB
Internally balanced throughout
Dante-based remote-controlled audio-over-IP connectivity
Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
Word Clock I/O and DARS for increased flexibility plus an additional two channels of AES/EBU I/O
Analogue I/O to AES59 standard on DB25 connectors
Comprehensive front-panel indicators
Software-based routing and control – no hardware patching required

 Focusrite Rednet A16R MK-II

Focusrite Rednet A16R MK-II

Rednet A16R MK2 הוא ממשק אודיו מקצועי התומך בפרוטוקול Dante עם 16 ערוצים אנלוגים ושני ערוצי AES3.

יש לו שליטה נפרדת על עוצמה של כל כניסה ויציאה מאפשרת כיוונון מדויק של העוצמות באמצעות תוכנת Rednet Control.

כממשק מקצועי שמיועד לשימוש בפרוייקטים שאין בהם מקום לטעויות, מכיל Rednet A16R MK-II שני ספקי כח ושני חיבורי EtherCON שמהווים גיבוי מושלם המופעל בזמן אמת ומותאם לעבודות שבהן עבודה רציפה היא קריטית כמו הקלטות, עבודות פוסט פרודקשרן והופעות חיות.

הכניסות והיציאות האנלוגיות נמצאות בחלקו האחורי של המכשיר ומגיעות בצורת חיבורי DB25 בתקן AES59 כשבנוסף קיימות עוד זוג יציאות/כניסות דיגיטליות בתקן AES3 בחיבורי XLR.

אותם חיבורי XLR יכולים לעבוד גם בתקן DARS בנוסף ל AES3.

סנכרון השעון של A16R MK-II יכול להתבצע על ידי שימוש בחיבור ה BNC ששולח או מקבל Word Clock כך שהוא יכול להסתנכרן לשעון אחר או להוות שעון המאסטר של אותה המערכת.

A16R MK-II מתאים מאוד להתקנות ב RACK (אולפן / אולם / קומפלקס כלשהו) או לעבודות ניידות שדורשות סטאפ אמין ומהיר כמו הופעות חיות.

כל החיבורים ננעלים ולא משתחררים בקלות כך שתוכלו להיות שקטים לחלוטין כשאתם עובדים.

איכות ההמרה והסאונד מיישרים קו עם איכות בניה מעולה, וכמו כל המוצרים של פוקוסרייט, גם A16R MK2 מגיע עם 3 שנים אחריות יצרן.

no-lazy

בגלישה באתר זה אני מאשר את מדיניות הפרטיות (המופיעה בתקנון האתר) ומסכים שהמידע ישמש למענה לפניה, רכישה או מטרות נוספות המפורטות בה. תקנון האתר ומדיניות הפרטיות